LOLER Safety Tag Insert

The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) covers any equipment used at work for lifting or lowering loads, including anchoring or supporting attachment. These regulations stipulate that the equipment is marked with the appropriate information for its safe use, such as safe working loads. daily and weekly checks should be made, in addition to a thorough recorded examination every 6 to 12 months. If the equipmemt is installed, the location must also be examined at the following points; After installation or after assembly but before first use on a site or in a new location.

Should the equipment be hired it should be accompanied by a physical copy of the last examination report. The Asset Tag Holder should be permanently fixed to the equipment in a suitbale safe place. Perform a thorough inspection of the equipment and complete the insert. In the result of an insepction failure remove the insert and inform a supervisor.

The LOLER Safety Tag Insert is designed to be used with the Asset Tag Holder. The Asset Tag Holder clearly states 'Don not use this equipment' when the tag is removed.

Insert Specification:
Height: 181mm
Width: 50mm
Depth: 0.5m
Material: Polypropylene

For bespoke inserts please contact our sales team on 0845 6430950